DPS Series 160-500 kVA

High Reliability

• N+X redundancy or hot-standby configuration ensures increased system reliability
• Wide input voltage ranges (DPS 160 kVA~500 kVA : -40% ~ +20%) allows the UPS to work at optimal performance levels even in harsh electrical environments
• Field programmable sequential start-up reduces the impact on the generator
• Intelligent fan speed control and redundant fan design prevent UPS from overheating and increase overall system reliability
• Parallel link functionality improves the stability of the output load, keeping the output load stable and the flow of power uninterrupted in the event of failure by a single UPS

Reduced Total Cost of Ownership

• High AC-AC efficiency even at light load levels reduces energy loss and lowers ongoing operating costs
• High input power factor (> 0.99) and low input harmonic distortion (iTHD < 3%) eliminate the need to oversize the genset, reducing initial capital investment

High Flexibility

• Significantly save installation space and lower rent expenses
• Reduce additional investment in batteries
• Make UPS expansions easier without the need for additional battery investments
• Lower the cost of possible floor loading enhancement

Easy Maintenance

• Hot-swappable fans reduce m
• aintenance lead time (applicable for 160 kVA UPS through 500 kVA UPS models)
• Built-in manual bypass allows zero downtime and ensures system availability even during service maintenance
• Main I/P and O/P switches detection provide quick diagnosis when faults occur

Intelligent Battery Management

• Battery temperature monitoring & compensation
• Battery remaining capacity displayed in percentage
• Protection against overcharge and discharge
• Boost/float stage charge
• Auto or manual battery test
• 38~42 battery units in one battery cabinet optimizes investment (applicable for 160 kVA UPS through 500kVA UPS models)

1. Model
2. DPS-160K, DPS-200K, DPS-300K, DPS-400K, DPS-500K

3. ---

4. Power Rating
5. ⦁ DPS-160K: 160 kVA / 144 kW
   ⦁ DPS-200K: 200 kVA / 180 kW
   ⦁ DPS-300K: 300 kVA / 270 kW
   ⦁ DPS-400K: 400 kVA / 360 kW
   ⦁ DPS-500K: 500 kVA / 450 kW

6. ---

7. Input
8. Nominal Voltage: 380/220 Vac, 400/230 Vac, 415/240 Vac (3 phase, 4-wire + G)
9. Voltage Range: 324~477 Vac (full load), 242~324 Vac (70~100% load)
10. Current Harmonic Distortion: < 3%⁽¹⁾
11. Power Factor: > 0.99
12. Frequency: 45~65 Hz

13. ---

14. Output
15. Voltage: 380/220 Vac, 400/230 Vac, 415/240 Vac (3 phase, 4-wire + G)
16. Output Power Factor: 0.9 (standard); 1 (optional)⁽²⁾
17. Voltage Harmonic Distortion: ≤ 1.5% (linear load); < 1% (linear load)⁽²⁾
18. Voltage Regulation: ± 1% (static)
19. Frequency: 50/60 ± 0.05 Hz
20. Overload Capability: ≤ 125%: 10 minutes; ≤ 150%: 1 minute

21. ---

22. Display: Mimic LCD supports multi-language and LED indicators

23. ---

24. Communication Interfaces
25. Standard: RS232 x1, Smart slot x2, Output dry contact x6, Input dry contact x7, (Input dry contact (two sets), REPO x1, External battery cabinet status detection x1, External battery cabinet temperature detection x4), Parallel port x2, USB port x1

26. ---

27. Conformance
28. Safety & EMC: CE, RCM

29. ---

30. Other Features
31. Parallel Redundancy: Up to 8 units
32. Emergency Power Off: Local and remote
33. Event Log: 500 records

34. ---

35. Efficiency
36. AC-AC: Up to 96%
37. ECO Mode: Up to 99%

38. ---

39. Environment
40. Operating Temperature: 0 to 40°C
41. Relative Humidity: 0-95% (non-condensing)
42. Audible Noise
    ⦁ DPS-160K/200K: < 70 dBA
    ⦁ DPS-300K/400K: < 73 dBA
    ⦁ DPS-500K: < 76 dBA
43. IP Protection: IP20

44. ---

45. Physical
46. Dimensions (W x D x H)
    ⦁ DPS-160K/200K: 850 x 865 x 1950 mm
    ⦁ DPS-300K/400K/500K: 1600 x 865 x 1950 mm
47. Weight
    ⦁ DPS-160K/200K: 697 kg
    ⦁ DPS-300K/400K: 1200 kg
    ⦁ DPS-500K: 1220 kg

48. ---

49. (1) When input harmonic distortion is less than 1%.
    (2) Available in South East Asia, Australia and New Zealand.
    
    All specifications are subject to change without prior notice.